American DJ Mega Uplighting Package

(No reviews yet) Write a Review
Calculated at Checkout

Product Overview

Our Best LED Uplighting Package  Packages includes 10 qty Mega Par Profile Led's 10 qty 12 ft XLR Cables 1 qty American DJ RGB 3C 1 qty Custom Carpet LED Road case 

Product: Mega Par Profile
The ADJ Mega Par Profile is a compact, low profile par designed for uplighting, stage lighting and will bring color and excitement to any party. This Par is intelligently designed so that it may sit directly on the ground or inside truss without the hanging bracket because the power & DMX Ins and Outs sit on the side of the fixture, not on the rear.  

The Mega Par Profile offers smooth RGB Color Mixing, has a 30-degree beam angle, 5 operational modes (including DMX, Sound Active and Master/Slave), and has 7 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC wireless remote, which is sold separately, to control the Mega Par Profile.  

Specifications: • Ultra bright slim flat black Par with 108 10mm LEDs (26 Red, 46 Green, & 36 Blue LEDs) • Smooth RGB Color Mixing (fast or slow color change operation) • Power & DMX Ins/Outs sit sideways so the unit can be set flat on the ground or set inside truss • Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers • 7 DMX Channel modes: 1, 2, 3, 4, 5, 6 or 7 channel modes  • 5 Operational modes: Auto mode and sound active feature with built-in programs • Stand Alone or Master/Slave Configuration • Beam Angle: 30 degrees • 32 built-in Color Macros • DMX-512 protocol • Color strobe effect  • Linkable via 3-pin XLR cable • Electronic Dimming: 0-100% • Flicker Free • Includes dual mounting brackets to hang on truss, mount on a wall or set on the ground • Long Life LEDs (50,000 hrs.) • Power Draw: 18W Max • IEC AC input and output on rear to daisy chain power • Compatible with ADJ LED RC wireless infrared remote control up to 30 ft./ 10M (sold separately) • Multi-voltage operation: AC 90V-240V 50/60Hz • Dimensions (LxWxH): 9”x8.75”x3.5”/ 225x220x85mm • Weight: 3 lbs./ 1.1 kg.

Product: RGB 3C
The RGB3C is a basic 3-channel RGB LED controller. It was designed to control any standard 3 channel RGB fixture where channel 1 is Red, channel 2 is Green and channel 3 is Blue. All LED fixtures must be set to run in DMX mode and be addressed to DMX channel 1. The units control panel includes nine direct access “Static Color” buttons, which contain pre-programmed color presets, 3 manual RGB faders so a desired color could be set on the fly, a Program select button which allows for 7 static colors and 10 chase programs to be accessed via the program select fader, a Sound Active button which activates the 10 chase programs to randomly sequence via an internal microphone, a Auto run button also activates the 10 chase programs to randomly sequence while the speed of the chases can be controlled via the Speed fader, a Hold button pauses the current scene and will remain locked in even when power to the controller is switched off and on, and finally a Blackout button to bring all values to zero so there is no output going to your fixtures. It’s the ideal control solution for D.J.’s, small night Clubs, and bars that want a simple LED controller to run the show.    Tech Specs: • DMX output connector: 3-pin XLR • Power In: 9-12V 300mA (Included) • Power consumption: 3.6 Watts • Size: 8.7” x 5.5” x 2.5” (22 x 14 x 6.3cm) • Weight: 1.8lbs. (0.8kgs.)


(No reviews yet) Write a Review